|
CS2 function file
The Channel 2 Communications Status File uses 71 one-word elements. Each word is addressable by word and/or bit through relay ladder logic.
The Channel 2 Communications Status File information is made up of the elements listed below. Click the links below to receive information on the words listed in the CS Function File.
(Words 0-5) General Status
Diagnostic Counters - select the appropriate comms driver for your configuration.
(Words 6-22)Channel 0 = DH-485 Master
(Words 6-22) Channel 0 = DF1 Full Duplex
(Words 6-22) Channel 0 = DF1 Half Duplex Slave
(Words 23-42) Active Node Table
(Word 70) End of List (Identifier Code 0)